In the rectifier circuit; the use of diodes in series can increase the back pressure withstand value (usually the sum of the back pressure of all diodes, but it is best to use diodes of the same specification).
TVS transient suppressor diodes work in the same way as regulator diodes, but there are structural differences.The biggest difference is that the PN junction area composed of the general regulator diode is very small, it can withstand the reverse current is small.
Transient Voltage Suppressor,Transient Voltage Suppressor Diode,Series diode Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com
Cell construction
Description
1.Cell type:GNC200=KPX200 (Extra-high rate nickel cadmium battery)
2.Rated capacity:200AH
3.Nominal voltage:1.2VÂ
4.Container material :ABS/PP
5.Delivery with dry battery . electrolyte(KOH+LIOH+DISTILLED WATER)Â Â Â Â
Type List
Cycle life
One cycle means a cell is fully charged and discharged. The cell's cycle life should not be less than 900 cycle. According to the applicable IEC standard,it shoud be 500 cycles at least. in case of float charge application,its cycl life may be longer.
Advantage of hmbattery
1.Having packing room,welding room,assembling room,heating room,production room etc
2.Wide operating temperature range from -25 °C to 45°CÂ
3.Long service life more than 20 yearsÂ
4.Excellent charging efficiency and smooth discharge voltage Â
5.High resistance to mechanical and electrical abuseÂ
6.Plastic maerial is produced by our own factory
7.Low maintenance cost and replacement cost.
8.Excellent sales man and engineers
9.Fastest delivery time
10.30 years Ni-Cd manufacture experience
12.Top three sales in China NiCd battery field
Application
Nickel-cadmium pocket plate batteries are available in three different plate designs optiized with regard to the required discharge(back up ) time. these categories are:
 High Rate(KPH)        for discharge periods of less than 60 minutes
 Medium Rate(KPM)      for discharge periods of more than 60 minutes
 Low Rate(KPL)        for discharge periods of more than 120 minutes
These cell ranges do perfectly satisfy the requirements of a really wide variety of different applications.
 1.High rate batteries
 Typical high rate applications are,among others:
 Electro MagnetsÂ
 Engine Starting
 Switchgears
 Uninterruptible power supply (UPS)
2. Medium rate batteries
 Typical medium rate applications are,among others:
 Electric Train ControlÂ
 Process ControlÂ
 Turbine Starting
 3.Low Rate Batteries
 Typical medium rate applications are,among others:
 Alarms
 Railway SignallingÂ
 Telecommunications
Company Information
Henan Hengming Fengyun Power Souce Co.,Ltd is professional ni-cd railway storage batteries manufacturer in China and have been in this line for 30 years.
our products have been exported to more than 20 countries, which performance is better and widely used for DC power, back-up power of railway, railway signaling, UPS, boat, Solar home application, boat, engine starting, etc
Hengming have attained the certificates of ISO9001 & ISO14001, and our products are accredited with TUV / CE/ IEC.
We built a new factory to expand our business.
Welcome to visit our new factory.
Packing and Shipping
The battery will be packed by polywood case. Electrolyte powder or wet electrolyte will be sent with accessories.
Certification
Contact us
Â
In the voltage stabilization circuit; the series connection of the diode is equal to the sum of the voltage stabilization value of the diode. The use of diodes in parallel is theoretically the sum of rated currents, but considering that it is impossible to be absolutely symmetrical, they can only be used below 80% of the total.