Flash Gold+Hard Gold board. the base Material is FR4 IT180A (TG180). 8-layer PCB.Copper thickness is 1oz inner-layer/1.5oz outer-layer.Board Thickness is 1.8mm and the Min.Hole Size is 0.3mm. Min.Line Width/Min.Line Spacing is 0.25mm/0.25mm. green solder-resist & white silkscreen. E-test: 100%. Flash Gold(hard Gold) is an expensive surface treatment, which has the advantage of being able to withstand friction. Flash Gold(hard Gold) Flash Gold,Custom Flash Gold,Hard Gold,Stick Flash Gold Orilind Limited Company , http://www.orilind.com
As a big manufacturer and exporter in China on the line of electric resistance alloy, we can supply all kinds of electric resistance alloy wire and strips (resistance steel wire and strips),
Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44
General Description
Due to has high tensile strength and increased resistivity values, TANKII copper nickel alloy wires are the first choice for applications as resistance wires. With the different nickel amount in this product range, the characteristics of the wire can be chosen according to your requirements. Copper nickel alloy wires are available as bare wire, or enamelled wire with any insulation and self-bonding enamel. Furthermore, litz wire made of enamelled copper nickel alloy wire are available.
Features
1. Higher resistance than copper
2. High tensile strength
3. Good bending proof performance
Application
1. Heating applications
2. Resistance wire
3. Applications with high mechanical requirements
4. Others
Appicaton:
Low-voltage circuit breaker, thermal overload relay, electrical heating cable, electrical heating mats, snow melting cable and mats, ceiling radiant heating mats, Floor heating mats & Cables, Freeze protection cables, electrical heat tracers, PTFE heating cables, hose heaters, and other low-voltage electrical product
Chemical Content, %
Ni
Mn
Fe
Si
Cu
Other
ROHS Directive
Cd
Pb
Hg
Cr
2
-
-
-
Bal
-
ND
ND
ND
ND
Mechanical Properties
Max Continuous Service Temp
200ºC
Resisivity at 20ºC
0.05±10%ohm mm2/m
Density
8.9 g/cm3
Thermal Conductivity
<120
Melting Point
1090ºC
Tensile Strength,N/mm2Â Â Annealed,Soft
140~310 Mpa
Tensile Strength,N/mm2Â Â Cold Rolled
280~620 Mpa
Elongation(anneal)
25%(min)
Elongation(cold rolled)
2%(min)
EMF vs Cu, μV/ºC (0~100ºC)
-12
Micrographic Structure
austenite
Magnetic Property
Non
Application of CuNi2
CuNi2 low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Cuni2 Resistance Wire for Resistor
As a big manufacturer and exporter in China on the line of electric resistance alloy, we can supply all kinds of electric resistance alloy wire and strips (resistance steel wire and strips),
Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44
General Description
Due to has high tensile strength and increased resistivity values, TANKII copper nickel alloy wires are the first choice for applications as resistance wires. With the different nickel amount in this product range, the characteristics of the wire can be chosen according to your requirements. Copper nickel alloy wires are available as bare wire, or enamelled wire with any insulation and self-bonding enamel. Furthermore, litz wire made of enamelled copper nickel alloy wire are available.
Features
1. Higher resistance than copper
2. High tensile strength
3. Good bending proof performance
Application
1. Heating applications
2. Resistance wire
3. Applications with high mechanical requirements
4. Others
Appicaton:
Low-voltage circuit breaker, thermal overload relay, electrical heating cable, electrical heating mats, snow melting cable and mats, ceiling radiant heating mats, Floor heating mats & Cables, Freeze protection cables, electrical heat tracers, PTFE heating cables, hose heaters, and other low-voltage electrical product
Chemical Content, %
Ni
Mn
Fe
Si
Cu
Other
ROHS Directive
Cd
Pb
Hg
Cr
2
-
-
-
Bal
-
ND
ND
ND
ND
Mechanical Properties
Max Continuous Service Temp
200ºC
Resisivity at 20ºC
0.05±10%ohm mm2/m
Density
8.9 g/cm3
Thermal Conductivity
<120
Melting Point
1090ºC
Tensile Strength,N/mm2Â Â Annealed,Soft
140~310 Mpa
Tensile Strength,N/mm2Â Â Cold Rolled
280~620 Mpa
Elongation(anneal)
25%(min)
Elongation(cold rolled)
2%(min)
EMF vs Cu, μV/ºC (0~100ºC)
-12
Micrographic Structure
austenite
Magnetic Property
Non
Application of CuNi2
CuNi2 low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Model NO.: CuNi2
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001, CCC, RoHS
Brand: TANKII
Serves: Small Order Accepted
Sample: Sample Available
standard: GB/ASTM/JIS/BIS/DIN
density: 8.9g/cm3
Elongation: 25%
MOQ: 20kilograms
surface: Bright
OEM: Yes
Size: 0.01-10mm
State: Soft 1/4hard 1/2hard hard T-hard
Trademark: TANKII
Transport Package: Packing in Coil Cartons, Pallet, Spools, Coils
Specification: SGS
Origin: China
HS Code: 74082200
Model NO.: CuNi2
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001, CCC, RoHS
Brand: TANKII
Serves: Small Order Accepted
Sample: Sample Available
standard: GB/ASTM/JIS/BIS/DIN
density: 8.9g/cm3
Elongation: 25%
MOQ: 20kilograms
surface: Bright
OEM: Yes
Size: 0.01-10mm
State: Soft 1/4hard 1/2hard hard T-hard
Trademark: TANKII
Transport Package: Packing in Coil Cartons, Pallet, Spools, Coils
Specification: SGS
Origin: China
HS Code: 74082200
Cuni2 Resistance Wire for Resistor