The Taiwan LED factory's self-sufficiency in February revenue was NT$320 million, which was about 18% higher than the NT$272 million in January. The company said that the main growth is from large-size backlight orders, while the small and medium-sized parts have also rebounded slightly. As for LED lighting demand, it will gradually warm up from next month.
Cross Arm is an important part of the
tower, it is used to install insulators and fittings to support the wire and lightning
lines, thus to keep safe distance between them.
According to the use, it can be divided
into: straight cross arm; corner cross arm;tension cross arm
Cross arm is generally installed at 300mm
from the top of the pole, and the straight cross arm should be installed on the
receiving side, while the cross arm on the corner pole, the terminal pole and the
branch pole should be installed on the guy wire side.
Cross Arm Cross Arm,Cross Arm For Transmission Line,Galvanized Steel Cross Arm,Angle Iron Cross Arm Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com
The company said that in the first quarter of this year, it mainly consisted of large-size panel backlight products. At present, the production line rate has rebounded to over 80%. In the second quarter, it will be driven by small and medium-sized panel backlight products and LED lighting. Second quarter operating performance.
 