Outdoor Single Jacket Unshielded 25-Pair Networking Ethernet Cable Hsyv3

Applications
10Base-T,10Base-T4

:ISO/IEC11801,ANSI/TIA/EIA-568-B(International standards: ISO/IEC11801,ANSI/TIA/EIA-568-B)

:YD/T1019(Domestic Industry's Standard: YD/T1019)

:GB/T18015 (State Standard: GB/T18015)

Features of Product

              Comply with the ROHS Standards;

              Many kinds of sheath can be designed

              according to the environmental demands;
              Special design for trunk voice transmission;

.             Clear labels be convenient for fixing.

 

 

Notes: PE- Polyethylene; PVC- Polyvinyl chloride; LSZH-Low Smoke Zero Halogen; Grades of PVC Fire Resistance CMX,CM,CMR and CMP.


  Physical and Electrical Characteristics

:1-16MHz  100±15Ω        Impedance: 1-16MHz  100±15Ω

:6.6nF/100m                 Max. Mutual Capacitance:  6.6nF/100m

:2.5%                 Max. Unbalanced DC resistance: 2.5%

:45nF/100m                Max. Differential phase delay: 45nF/100m

:10               Permitted bend radius: 10 times diameter of the cable

:0~+55ºC                 Fixing temperature: 0~+55ºC

:-20ºC~+60ºC           Operating temperature: -20ºC~+60ºC

:80N                        Max. Tension: 80N

:1.0kV/min             Min. Dielectric Strength Between Conductors: 1.0kV/min

 

 

Transmission Performance

 

Applications
10Base-T,10Base-T4

:ISO/IEC11801,ANSI/TIA/EIA-568-B(International standards: ISO/IEC11801,ANSI/TIA/EIA-568-B)

:YD/T1019(Domestic Industry's Standard: YD/T1019)

:GB/T18015 (State Standard: GB/T18015)

Features of Product

              Comply with the ROHS Standards;

              Many kinds of sheath can be designed

              according to the environmental demands;
              Special design for trunk voice transmission;

.             Clear labels be convenient for fixing.

 

 

Notes: PE- Polyethylene; PVC- Polyvinyl chloride; LSZH-Low Smoke Zero Halogen; Grades of PVC Fire Resistance CMX,CM,CMR and CMP.


  Physical and Electrical Characteristics

:1-16MHz  100±15Ω        Impedance: 1-16MHz  100±15Ω

:6.6nF/100m                 Max. Mutual Capacitance:  6.6nF/100m

:2.5%                 Max. Unbalanced DC resistance: 2.5%

:45nF/100m                Max. Differential phase delay: 45nF/100m

:10               Permitted bend radius: 10 times diameter of the cable

:0~+55ºC                 Fixing temperature: 0~+55ºC

:-20ºC~+60ºC           Operating temperature: -20ºC~+60ºC

:80N                        Max. Tension: 80N

:1.0kV/min             Min. Dielectric Strength Between Conductors: 1.0kV/min

 

 

Transmission Performance

 

An aerial cable or air cable is an insulated cable usually containing all conductors required for an electrical transmission system or a telecommunication line, which is suspended between utility poles or electricity pylons. As aerial cables are completely insulated there is no danger of electric shock when touching them and there is no requirement for mounting them with insulators on pylons and poles. A further advantage is they require less right of way than overhead lines for the same reason. They can be designed as shielded cables for telecommunication purposes. If the cable falls, it may still operate if its insulation is not damaged.

As aerial cables are installed on pylons or poles, they may be cheaper to install than underground cables, as no work for digging is required, which can be very expensive in rocky areas.

Aerial Insulated Cables

Aerial Insulated Cable, PVC Insulated Power Cable, Aerial Bundled Cable

Hebei Huanya Cable Co.,Ltd , http://www.hbhycable.com