Tender number The name of the target Tender scope unit Quantity delivery time Delivery Method trading locations Note CWEME-DTJT015 Circulating pump Type: Vertical guide vane mixed flow pump Flow rate: 2.75~3.71m3/s Head: 18.4~14.3m Speed: n≤600rpm Efficiency: ≥85% station 4 2017.05.30 Car delivery on site Circulating pump cooling water pump Horizontal pump station 2 2017.05.30 Car delivery on site CWEME-DTJT016 Phase-closed bus from the gas turbine Type: Fully connected phase-closed metal enclosed busbar set 1 2017.05.01 Car delivery on site Rated voltage: 18kV Design maximum voltage: 24kV Rated current: 13000A The length of each main circuit (measured in phase B): 74m Steam turbine off-phase closed bus Type: Fully-connected phase-releasing metal enclosed busbars set 1 2017.05.01 Car delivery on site Rated voltage: 15.75kV Design maximum voltage: 18kV Rated current: 8500A The length of each main circuit (in phase B): 40m 2, bidder qualification requirements Tender number The name of the target Qualification requirements CWEME-DTJT015 Circulating pump registered capital 10 million yuan. Production License Have. Delivery performance The company has sales, design, and manufacture of four sets of equipment units with the same or higher capacity. Performance In the past five years, the bidder has two sets of circulating water pump equipment with the same or higher capacity units for more than two years of good operating experience. No major equipment quality problems or effective improvement measures have been found during installation and commissioning operations. CWEME-DTJT016 Isolated Phase Bus Specification registered capital 15 million yuan. Production License Have. Certification certificate The bidding company has passed the ISO9000 quality management system certification and its certificate is within the validity period. Delivery performance In the last three years (calculated by the deadline for bid submission), the cumulative sales performance of the fully-connected off-phase metal-enclosed busbar equipment for the same or higher capacity units is not less than 4 sets (provide contract certification). Performance Within the last three years (calculated by the deadline for bid submission), at least two sets of all-connected phase-releasing metal-enclosed busbar units of the same or higher capacity units have successfully operated for more than one year under the same or more stringent regulatory conditions. (provide relevant operation certificate). Test report There shall be a valid type test report of an authoritative testing agency approved by a third party. 3, access to tender documents Contact: Zhang Jie Mobile: phone fax E-mail: In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee. Ip67 Outdoor Power,Power Supply 24V 250W,Led Power Supply 24V 250W,Waterproof Led Power Jiangmen Hua Chuang Electronic Co.,Ltd , https://www.jmhcpower.com
Bulletin category: Domestic tender
Tenderee: Jiangsu Datang International Jintan Thermal Power Co., Ltd. Source of Funding: Other Jiangsu Datang International Jintan Gas-fired Combined Heat and Power Co., Ltd. Circulating Water Pump and Phase-to-phase Closed Bus Tender Notice
1, the basic situation
1.1 Project Name: Jiangsu Datang International Jintan Gas Turbine Cogeneration Project
1.2 Target name: circulating water pump
1.3 Source of Funds: 20% Capital Self-raised + 80% Business Financing
1.4 Construction Site: Jintan Economic Development Zone, Jiangsu Province
1.5 Construction Scale: 2 sets of 400MW (F class) gas-steam combined cycle cogeneration units
1.6 Planning Period: 16 months
1.7 Project Description: Two sets of 400MW (F class) gas-steam combined cycle cogeneration units will be constructed in this period.
1.8 Tenderee: Jiangsu Datang International Jintan Thermal Power Co., Ltd.
1.10 Bidding scope: (Indicate the scope, content, scale, quantity, technical specifications, delivery time, delivery method, delivery place requirements, etc. of the tender for this tender)
2.1 Qualified bidders and their bid products must meet the following general qualification requirements:
2.1.1 Bidders must be legal entities or other organizations registered in the territory of the People's Republic of China.
2.1.2 The bidder shall have the manufacturing capabilities of the corresponding equipment, and shall have the ability to undertake the tendering project in terms of personnel, equipment, funds, etc., as well as the inspection capability of products, components, components, materials and accessories. Unless otherwise specified, these qualifications, qualifications and performance are all rights and interests of the bidder’s own company.
2.1.3 Designed and manufactured products with the same structure, the same type, the same or more technical specifications as the bid product. Under the same or more strict normative conditions as the specification, the quantity or supply quantity of the product and its successful operation time meet the requirements of the tenderer. If there are different types of equipment in the same tender section, the applicant must meet the eligibility requirements for each category of equipment in the tender section.
2.1.4 Acquire an effective product test and appraisal report issued by an international authoritative organization or a product inspection and testing agency authorized and licensed by the State, and the report conclusion data shall meet the requirements of this tender.
2.1.5 Bidders have good bank credit and business reputation, are not being ordered to suspend business or go bankrupt, and assets have not been restructured, taken over and frozen.
2.1.6 In the past three years, during the fulfillment of the supply contract, after-sales service and product operation, there has been no breach of contract after the successful bidder, serious breach of contract provisions during the performance process, and major quality problems in the product supply.
2.1.7 is not suspended or canceled.
2.1.8 This tender does not accept the agent's bid.
2.1.9 Each potential bidder can purchase part or all of the tender documents of the tender for participation in the bidding.
2.1.10 Legal persons and other organizations that have a stake in the bidder’s impartiality may not influence bids; the person in charge of the unit is the same person or a different unit that has a controlling or managerial relationship, and may not participate in the bid for the same tender or may not be subdivided. The tender for the same tender item of the segment.
2.2 Qualified bidders and their bid products must meet the requirements for the special qualifications of the corresponding equipment for tendering. The requirements, data, and status of the requirements for the special qualifications of various types of equipment are listed in the appendix “Special Qualification Performance Requirementsâ€. Bidder special qualification performance requirements
3.1 Method of Obtaining: Any bidder who intends to participate in this bidding, (.)
3.2 Release date: November 15 to November 25, 2016. (It takes 5 to 7 days to process the CA certificate electronic key, including material preparation, mail processing, and CA certificate electronic key return time. Please properly consider the arrangement processing time. Overdue system will not be able to download the bidding documents and the bidding fee will not be refunded. .)
4. Submitting bid documents
4.1 Deadline for Submitting Bidding Documents (Bid Deadline, the same below): December 10, 2016, 10:00.
Tender No. Bidding Code: CBL_20161116_188900164