I Bar Vape 5500,Disposable E-Cigarette 5500 Puffs,I Bar Vape 5500 Puffs,Disposable Vape 5500 Puffs Shenzhen Niimoo Innovative Technology Co., Ltd , https://www.niimootech.com
Today, Xiao Bian gave you nine secrets that caused the box to be malted, and it was necessary to properly maintain it and use it properly.
1 remote control board a key standby, does not turn off the power
Everyone is accustomed to the press of a remote control panel to keep the box and TV in standby. Occasionally, this is nothing, but the frequency is frequent, and there is no need to be in standby for several months. The damage to the box is very large because it still consumes electricity.
The correct approach is to turn off the TV power and then unplug the TV box adapter.
2. Take out the memory card or U disk while using
This is similar to the “hot plugging†used in mobile phones. Many people have realized that when using a box as a local application, unplugging the memory card or USB stick in use is actually very harmful.
In particular, when looking at the local video with the amount of memory, the removal of the memory card will damage the main board of the box and cause the system to crash. The box will naturally be stuck.
The correct method is to exit the video and then remove the memory card or USB flash drive.
3. Often put the TV box next to high-power appliances
High-power electrical appliances are a source of heat radiation, and at the same time, they are electromagnetic transmitters. Such as stereos are simply bulldozer-level; the placement of boxes is not only unfavorable to heat dissipation, but also affects WIFI. At this time, a splash screen may appear. Caton phenomenon.
4. Interfaces for frequent plugging and unplugging of TV boxes
Frequent plugging and unplugging may cause poor contact or damage to the interface, and may also cause dust to enter and affect the normal operation of the box.
5. Unstable power output environment use
Plug-in board again, too many connected appliances, the same unreliable.
The landlord recommends that you do not buy cheap, buy a good patch panel, and insert the TV box plug-in board do not insert too many appliances.
6. Put the TV box in a greasy, moist environment
This does not need to say that it is very difficult for people to go through a damp, greasy environment, not to mention a small TV box. In this environment, but its main board metal sheet is still very fragile, rusty corrosion will not only affect the normal use, the service life will be much shorter.
7. Cover debris on the TV box or place the TV box in a hidden corner
With the principle of wireless routing is similar, the wrong place, too many things covered, the TV box signal has an impact, the same reason, put too far will affect the signal, Caton, splash screen is also very easy to appear.
8. Do not clean TV boxes, software or junk files for too long
This is not a technical issue. It is just a habit. You use your mobile phone to clean up junk files. The TV box is the same. You want to use the box and clean it up every day. You can delete all the uncommonly used and identical software. The same type of software only needs to install a relatively complete software is enough, we can go to the recommended column of the sofa butler; inside choose the software you want to install. For example, film and television only need to install video search, games only need to install the grape game hall just fine. 
The correct approach is to install a cleanup software on the TV or on the box. The most commonly used is the sofa assistant. You only need to move your finger and remote control to perform a key operation. You can clean up the system's residual junk files. Keep the box system clean and bloated. 
9. The TV is too old
The TV box card is not necessarily the problem of the TV box. The influence of the TV cannot be ignored. The aging of the TV affects the output of the image quality and affects the signal reception. Use the HDMI HD cable when using a TV box. This is a conservative and stable method.
The good habit of using TVs and boxes everyday is the best way to keep your TV and box alive!
Whether it is Tmall, Xiaomi, or LeTV, Huawei and other big brands of TVs and boxes, it will take a long time. Catrons, splash screens, and slow response will all affect a series of serious problems. After Xiao Bian consulted the manufacturer, he found that the TV and the box itself had no problem. So what caused the box to appear stuck, splash screen, and slow response?