The 18th Cross-strait Machinery and Electronics Commodities Fair and Xiamen Import and Export Commodity Fair opened on the 12th. Wu Ling, director of the Semiconductor Lighting Project Management Office of the Ministry of Science and Technology, said: “In the future, the lighting industry on both sides of the Taiwan Strait will further carry out deep-level cooperation, coordinate and coordinate, and accelerate substantive cooperation between the two sides in terms of standards, research and development, and patents.†1200V DC Electronic Load System
1200V DC Electronic Load System has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.1200V DC Electronic Load system including 39600W/52800W/66000W.BTW,if the 1200V is too big voltage for application,it can also choose lower 200V DC Electronic Load System and higher 1200V DC Electronic Load System .
kindly check below features are for your reference:
â— Flippable front panel and color touch screen allow convenient access and operation 1200V Battery Discharge DC E-load, 1200V Short circuit DC electronic load, 120V IV-monitor DC electronic load APM Technologies Ltd , https://www.apmpowersupply.com
"In 2004, the three sides of the Taiwan Strait established the Semiconductor Lighting Alliance in Hong Kong. In 2011, under the ECFA framework, LED was listed as one of the five directions for cross-strait industrial cooperation." Wu Ling said that in the past decade, in the optoelectronic industry cooperation, The two sides of the strait have signed an industrial yearbook, three technical specifications and two common technical specifications for the two sides of the strait.
"The power consumption of LEDs is only about 20% of the brightness of conventional tungsten light sources. Its high-profile industrial status has made pure semiconductor light sources an indispensable component of the new era of lighting systems." Taiwan Institute of Technology Zhu Mudao, head of the Optoelectronics Optoelectronic Component and System Application Group, said that how to use LED's industrial development experience requires the joint efforts of both sides of the industrial sector to continuously invest in the key technology development of LED lighting.
"The two sides of the Taiwan Optoelectronics enterprises should be based on application needs, give full play to the biggest advantages of LED lighting sources, to promote the application of LED lighting technology development." Academician of the Chinese Academy of Sciences Zheng Youxi said.
â— Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
â— Adjustable current slew rate, adjustable CV loop speed
â— Ultra high precision voltage & current measurement
â— OCP/OPP testing function
â— 50kHz high-speed CC/CR dynamic mode
â— 500kHz high-speed voltage and current sampling rate
â— Timing & discharging measurement for batteries
â— Short circuit test mode
â— Auto mode function provides an easy way to do complicated test
â— Dynamic frequency sweep function for determining worst case voltage peaks*
â— Non linear load mode function makes the simulated loading current more realistic*
â— Supports external analog control function*
â— V-monitor/I-monitor
â— LED load simulation function
â— Full protection: OCP, OPP, OTP, over voltage and reverse alarm
â— Up to 20 units master/slave parallel control
â— Front panel USB interface supports data import and export
â— SCPI language and standard rack size make it ideal for ATE System integration
â— Smart fan control with lower noise and better for environment
â— Multi versions to meet the cost performance and different applications
* Only professional Electronic Load units support these functions