(1) The high temperature environment causes problems such as melting of the coating material, solder joint opening, and structural changes in the stress in the elastic body. High-temperature resistant sensors are often used for sensors working in high-temperature environments; in addition, devices such as heat insulation, water cooling or air cooling must be added.
(2) The effect of dust and humidity on the sensor caused a short circuit. Under this environmental condition, a sensor with high airtightness should be selected. Different sensors have different sealing methods, and there are great differences in hermeticity.
Common seals are filled or coated with sealant; rubber pads are mechanically tightened and sealed; welding (argon arc welding, plasma beam welding) and vacuum nitrogen sealing.
From the point of view of sealing effect, welding sealing is the best, and filling and coating of sealant is the difference. For sensors that work in a clean and dry environment indoors, you can choose sensors that are glued and sealed. For sensors that work in a humid and dusty environment, you should choose a diaphragm heat-seal seal or a diaphragm welding seal and pump. Sensor for vacuum nitrogen filling.
(3) In a highly corrosive environment, such as moisture or acid, which damages the elastomer or short-circuits the sensor, the outer surface should be sprayed or stainless steel cover, which has good corrosion resistance and good airtightness. sensor.
(4) The influence of the electromagnetic field on the sensor output disorder signal. In this case, the shielding of the sensor should be strictly checked to see if it has good electromagnetic resistance.
(5) Flammable and explosive not only cause complete damage to the sensor, but also pose a great threat to other equipment and personal safety. Therefore, sensors working in flammable and explosive environments place higher requirements on explosion-proof performance: explosion-proof sensors must be selected in flammable and explosive environments. The sealed enclosure of this sensor must not only consider its tightness, but also The explosion-proof strength and the waterproof, moisture-proof and explosion-proof properties of the cable head should be considered.

Light bar is another name for LED Strip Light, is named for its shape. Just as Chinese pictograph, whichever shape together with associated material derived. Common title Great Wall lights, LED light bar, LED soft light, light bar, FPC strip lights, etc.

Led Strip Light with conventional and LED light bar is divided into two kinds of flexible LED lights,like ip65 led strip,ip20 led strip,led strip blister, but also generally contain wire connecting with old-fashioned LED lights, such as flat three-wire 4.3W / m, flat four-wire 6.48W / m, flat five lines 8.64W / m light zone.

led strip light led strip light

1, a flexible LED strip light is made using FPC assembled circuit boards, assembled with SMD LED, the thickness of the product is only the thickness of a coin, does not occupy space; common specifications are 30cm long 18 LED, 24 pcs LED and 50cm long 15 LED, 24 Ke LED, 30 pcs LED, etc.


2, LED strip light is made with hard-board PCB circuit board assembly, LED SMD LED helpful for assembly, but also useful for assembly-line LED, depending on the needs of different elements and different. Advantages light bar is relatively easily fixed, processing and installation are more convenient; shortcomings can not be bent, not suitable for irregular place. SMD LED light bar with has 18 LED, 24 LED, 30 pcs LED, 36 LED, 40 pcs LED, etc. Good variety of specifications; with LED line are 18, 24, 36, 48 different specifications.


We focus on LED area, is a high-tech lighting enterprise deal in develop, produce and sales.

Owns DIP LED,SMD LED professional production lines and LED strip light products lines, the produce volume per month for DIP LED,SMD LED is 50 million pieces, for flexible LED strip light is 500 thousands meters, for LED flexible strip light for car is about 200 thousands pairs, for LED tube light is 50 thousands pieces, for LED Spotlights are 200 thousands pieces, for LED ceiling light are 50 thousands pieces.


Our R & D team can handle highly customized designs and offer OEM and ODM services.
We hope to set up a long-term partnership with you through our high quality products and our Sincere Service!

led strip light

Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, we apply the CE, RoHS and SAA certificate for our led strip light product.

led strip light

led strip certificates

LED Strip Light

Led Strip Light,Smd3528 Led Strip Light,Smd5050 Led Strip Light,Smd2835 Led Strip Light

Shenzhen Mingxue Optoelectronics CO.,Ltd , https://www.led-lamp-china.com

Posted on