FUNCTION DESCRIPTION
Countdown
socket has an AC outlet, the maximum can output 230 V16A of power,
there are two control modes, that is, countdown off and countdown on. It
is convenient to control the equipment which needs to switch off or
turn on AC. improve the safety of the use of some equipment and save
more energy.
SET TIMER
1,Countdown
plug in the socket, all indicator lights red flash three times, at this
time the socket has no output, for the normal state, into the countdown
state. Click the button, the first red light up, the socket output
after an hour off, and then short press the button can set the socket
timing of 2 H.4H.6H.8H.10H.OFF.
2,Long
press button 3s, all indicator lights green flash three times, at this
time the socket has output, for the regular open state, into the
countdown on state. Click on the button, the first green light on, the
socket is closed an hour later, and then press the button to set the
socket countdown 2 H.4H.6H.8H.10H.OFF.
3,Press button 3 longer S, all indicator lights red light flash 3 times again into countdown mode.
4,Select
the required countdown time mode, the corresponding mode countdown
lights up, start countdown until the end of the countdown time. The
outlet that controls the output will start or stop the output.
5,After the countdown starts, the time indicator will change automatically from high to low until the countdown is over.
NOTE:
1,Check that the power connection is good.
2,Use only indoors and in dry places.
3,This product does not convert AC voltage.
4,Maximum load not exceeding 16A 3680W.
5,Grounding is required for safety.
Countdown Timer Socket Switch, Countdown Timer Plug,Countdown Timer Plug Socket, Energy Saving Countdown Timer Switch Socket, Countdown Timer Switch NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com
OPTEK Technology ( http:// ) comes out with a series of LED module strips for signage and channel-letter applications. The LED strips are available in three models: OVM18F4x7 Series 4 LED module strips; OVM12F3x7 Series 3 LED Module strips; and OVQ12S30x7 Series flexible LED light strips.
Available in red, amber, green, blue and white, the LED strips provide fast response times and low power consumption, resulting in low power requirements from circuit power supplies. The LED light strips provide an operating life that is longer than traditional fluorescent and incandescent Light sources.
Typical applications for OPTEKs LED light strip product line include commercial channel lighting for signage applications, media illumination, large area backlighting, point-of-sale displays, mood-setting decoration, landscape lighting, and neon replacement lighting.
OVM12F3x7 Series 3 LED module strips - comprised of 30 modules per strip in lengths of 3 inches to over 40 feet long, the waterproof strips feature a power dissipation of 1.5W, input voltage of 12V, and operating temperature ranging from -30∑C to +50∑C.
OVM18F4x7 4 LED module strips - consisting of 20 modules per strip in lengths from 3 inches to over 30 feet long, the waterproof strips feature a power dissipation of 1.5W, input voltage of 18V, and operating temperature ranging from -30∑C to + 50∑C.
OVQ12S30x7 flexible LED light strips - comprised of 30 high brightness LEDS per unit in lengths up to 16 feet, the red and yellow LED strips feature a power dissipation of 2.7W while the green, blue, white and warm white strips feature a power dissipation of 2.3W, with an input voltage of 12V and operating temperature
Of -30∑C to +50∑C.
Typical pricing for the OVM12F3x7 3 LED module strips begins at $1.58/module. Pricing for the OVM18F4x7 4 LED module strips begins at $2.01/module, and pricing for the OVQ12S30x7 flexible LED light strips starts at $7.48/unit of 30 LEDs. All pricing is For quantities of 1,000 pieces. 
- File#1 OPTEK_LED_module_strip.jpg (169.7 KB) , download : 11