Smart home multi-function panel control wiring (2)

When the control object is a high-power device that is more than 1000W and less than 2000W, the smart socket control can be selected (refer to "Intelligent socket installation wiring"); when the control object is an ultra-high-power equipment greater than 2000W, it can also be used with a relay driver module The multi-function panel drives an intermediate AC contactor, which in turn is driven by an AC contactor.

Multi-function panel for controlling the installation wiring of a single electric curtain

(1) Multi-function panel (with dual drive module) to control the installation wiring of a single electric curtain. The dual drive module can drive a 220V AC motor for control of electric curtains/electric roller shutters/electric roller blinds.

The L input voltage is the AC power input terminal (FireWire) of the electric curtain or electric roller shutter (roller blind), and Ll, L2 are the left and right or upper and lower open and close output control terminals of the electric curtain or the electric roller shutter (roller blind), respectively. Conversely, the L1 and L2 terminals can be reversed; the common end of the motor (N) is connected to the neutral line; in addition, COM1 is connected to the communication bus.

(2) Multi-function panel (with four-way driver module) controls two electric curtains.

The four-way drive module can drive two 220V AC motors and can control two electric curtains, suitable for double curtain control.

The L input voltage is the AC power input terminal (phase line) of the electric curtain or electric roller shutter (roller blind). Ll, L2 are the left and right or upper and lower opening and closing output control terminals of the first electric curtain, respectively. If the motor turns in the opposite direction, then The Ll, L2 terminals can be reversed; L3, L4 respectively for the second road of the electric curtain left and right or up and down the output control terminal, if the motor turns in the opposite direction, then the L3, L4 terminals can be reversed; the common motor end (N) connects the zero line; In addition, COM1 accesses the communication bus.

Multifunction panel with sensor interface access general switch panel dry contact signal

The back of the multi-function panel has two interfaces, one is COM1 (Bus Interface) and the other is COM2 (8P8C Bus Expansion Interface or 6P4C Sensor Interface). If the COM2 of the multi-function panel is a sensor interface, two third-party dry contact signals can be connected (the dry contact signal can be from any third-party sensor or the action of a common switch panel key):

(1) The first dry contact is connected to the 3rd line of the 6P4C sensor interface crystal head;

(2) The second dry contact point is the 4th line of the 6P4C sensor interface crystal head.

The function of the dry contact received by the person depends entirely on the specific settings of the dry contact event.

The sensor interface of the multi-function panel, through the dry contact event setting function, can not only incorporate third-party sensors (sensor wiring should refer to the sensor installation wiring), but also can be incorporated into the traditional ordinary switch panel.

For example, a multi-function panel with a sensor interface is installed at the entrance of the master bedroom. This multi-function panel can control all lights, home appliances, background music, electric curtains, and lights on the master bedroom, fully off, sleep, night, and early morning. Reading, romance, etc. If you install a multi-function panel on the bedside, you can achieve the same function. However, in order to save costs, the bedside is not equipped with a multi-function panel or smart switch, but only a traditional ordinary two-button switch panel. The ordinary double-key switch panel is connected to the sensor interface of the door multi-function panel. Through the dry contact event setting in the management software [multi-function panel interface and parameter setting] form, two common key switch panels can be arbitrarily defined. The control object of the key, for example, one of the keys is set to control the switch of the main bedroom wall light, and the other key is set to achieve the full close function of the main bedroom or the full house light.