The slogans of the three major operators “speed up and reduce fees” are louder and louder, and 100M fiber is not a rarity, but obviously, if you handle 100Mbps broadband, why does it always feel that the speed is unstable and that you will still be watching cards online? In fact, there are many reasons for Caton. While our broadband has increased from a few megabytes to hundreds of megabytes, wireless routers are also faced with a large-scale update. This point is easily overlooked by many users.

Why Should You Replace a Router After Speed ​​Up?
Nowadays, more and more devices are needed in the home to use wireless networks, ranging from smart TVs to tablet phones. Each home wireless device has at least 5 or more accesses, and the future may only increase. In addition, ultra-high definition and 4K are now available. The popularity of VR, etc. has gradually become common. The old-fashioned routes of the low-order version cannot be supported at all.

[router purchase standard]
1.802.11ac wireless standard is a must


Since 2013, the 802.11ac wireless standard router products have entered the market and have become the mainstream in the market. However, for three years, it is now the second generation 11ac technology. It supports routers to communicate with multiple devices at the same time without interruption, and eases the situation. Channel congestion and interference issues.

Among them, the attenuation in the 2.4G band propagation process is small, and the propagation distance is farther. However, the 2.4G band width is relatively narrow, and there are many devices using the 2.4G band. Therefore, the channel congestion and interference are large.
In contrast, the 5G signal frequency is high, but the attenuation of the propagation process is large, and the propagation distance is far less than 2.4G. Due to the wider 5G band, there is less signal interference, stable network speed, and support for higher wireless speeds.

Both frequencies need to be seen by individuals.

2. Gigabit wan

If the WAN port rate is too small, then no matter how high the external bandwidth is, it is still a 'small water pipe'. Therefore, for ordinary home users, it is necessary to have a Gigabit WAN port on the router. Improving broadband is like thickening water pipes. The router is the faucet and the faucet is only so big. Therefore, the water flow is slow. In order to have large flow and fast speed, the faucet needs to be replaced.

3. Router CPU

The smart routers currently on the market are equipped with CPUs. The quality of the CPU determines the speed, signal stability, and data exchange efficiency of the router. The main frequency is one of the important standards to measure CPU performance. The higher the main frequency, the better the performance.

4. Antenna material and technology

How much, the pitch and the gain of the router antenna will directly affect the strength and coverage of the WIFI signal, so everyone in the selection of routers, try to choose a router device with multiple antennas and wide antenna spacing.
In addition, many manufacturers are in the 2.4G band, increase PA transmitter chip and LNA receiver chip, external FEM module in the 5G band, these will significantly increase the transmission performance, reduce signal interference, significantly increase Wi-Fi signal transmission distance And agility.

Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.

100kw-400kw Silent Generator

100Kw-400Kw Silent Generator,12V Silent Generator,100Kw Silent Generator,Below 75Db Silent Generator

Jinan Guohua Green Power Equipment Co.,Ltd. , https://www.guohuagenerator.com

Posted on