When talking about tripods, enthusiasts generally have a long and thick black preference, and they can't wait for various Gitzo FLM RRS to walk. But why do you use a knives to kill chickens? The Manfrotto 055 carrying a frame out of the lighthouse was lightweight but not counter-intuitive, and its heart was absolutely collapsed. If you ask me what photographic equipment is the best, at the moment I will say that you are willing to take out the best, even if it is a mobile phone. Photographic equipment should not be a burden on daily trips. The size and weight of a desktop tripod have absolute advantages. Moreover, in some cases, conventional tripods are too noticeable, and it is best to keep low-key and refuse to send crowds for warmth. The earliest manufacturers of such tripods should be the famous RRS, and the price is very beautiful... 晟崴 has launched imitation, but sales and visibility are very low, even in the official flagship store can not find this product. Since it is only a simple re-engraving, the factory has not specifically developed PTZ for it. Some time ago launched a suit, the stand is upgraded to T1A20 and with the newly developed XB-28 head. After reading the original, it was very heart-watery. Not only did it completely get rid of the traces of the previous generation's imitation, but it also added the original design to be green and blue. As for the Ma Xiao Lu MT-01 should not be too much introduction, a lot of relevant original out of the box articles. As the current top-ranked tripod, reputation and strength are obvious to all. Then the question arises. Why do you know that there are better alternatives that you don't choose, and instead start with a graphic suit? Probably because the mother has no singles, and secondly I am curious as to what kind of imitation this lowest-priced imitation can achieve. Previously there was no impression on the brand, and later it was discovered on the Internet that it was a company whose headquarters was located in Zhongshan. Outer packaging design strives to be concise. I believe most people pay attention to the product itself. The main parameters of the tripod and the table are marked at the bottom of the box. However, the weight units of the pan tilt and the tripod are incorrectly marked as kg, and manufacturers can use dim sums. Full set of accessories. The number of fixing screws on the head and the stand is the same, and there is only one standard wrench. There is no need to carry multiple wrenches for the job. There is also a piece of small metal, the role is unknown. Fully expanded The weight of the MT-01 tripod is about 168g, and the main material is aluminum alloy. The official stated that the maximum weight can reach 50kg. After fully deployed, the height is 45mm, and the height of the gimbal is about 67mm. The whole pan/tilt is locked with only one knob, and after the tightening, the sphere and the rotation angle of the pan/tilt are locked at the same time. This poses a problem, and it is difficult to ensure that the sphere is relatively stationary when used with a camera (1KG or more) with a large self-heavy weight. Therefore, the use of the panorama function is very limited. The main knob adopts a pull-type design, and the handle can be pulled out to adjust the position. During the experience, the interference between the holder and the knob rarely occurs. The details of the PTZ are in place. The gasket between the ball and the shell is not saved, the rotation feel is smooth, and the sponge is filled in the opening of the shell. It can be avoided to a certain extent. PTZ model is LH-25, ball diameter 25mm, weight 171g, single opening design. The first time I touched the 25mm sphere head, I felt confident when I reached the hand. It felt absolutely deceptive. However, after a period of testing, the size of the PTZ, which is quite small and even slightly adorable, has to be impressive. The pan/tilt screw hole size is UNC3/8"-16. The 1/4" conversion screw at the factory is pre-installed on the pan/tilt. Clip holder width 25mm, Akai standard, no built-in spirit level. There are three openings in the holder, and the user with the heart can attach a hand strap to the right opening. The quick-fitting board model is PU-25. The picture may not be intuitive. In fact, it is not much larger than the SD card. It is too small for a telephoto tripod ring and the bottom of the SLR body. What is even more puzzling is the fact that there is a non-slip slot in the holder, but there is no anti-fall screw on the quick plate. The clamp seat is only 25mm wide, and the fault tolerance is very low when used with larger weight equipment. It can easily slip out of the clip seat without clamping, and the reaction is not enough to crash. The superior texture of the suit is very good impression, except that there are a lot of defects, and it is highly recommended to use the quicker plate with a larger size in the hands instead. There is no useful panorama scale logo. The diameter of the mounting platform is 36mm, which is consistent with the diameter of the pan-tilt base in the set. As the desktop tripod's primary control is volume and weight, the platform diameter can't be compared with conventional tripods. It's more difficult to take PTZs apart (must take into account the stability and appearance coordination), basically only 28mm and below the diameter of the ball PTZ to choose from. Taking into account the low price of the package, this is not entirely acceptable, not to mention that the competing products failed to completely solve the same problem. The structure of the tripod is very simple. The leg tube is connected with the base through the screw. You can use the Allen wrench to adjust the tightness. In the past month, she has not seen any looseness and can maintain a good sense of damping. The shortcomings are also obvious. The lack of gear selection is still limited in some cases. The height of the fully deployed state is very low, and sometimes it is a few centimeters. 徕图logo Foot pad made of rubber material, non-slip effect is first class. Standard canvas storage bag Shenniu V860-II compare size on the machine What is the level of load-bearing capacity? Hanging D810 + DDP/2470, 5D3 + white rabbits and other mainstream full range combination goes without saying, a word stable two words very stable three words very stable. After all, the desktop tripod has a simple structure and a very low center of gravity. Of course, the method of use should be correct. There should be no use of a tripod ring, and deliberately making the center of gravity greatly deviate from the area of ​​the triangular projection must be reversed. Although the LH-25 PTZ is compact, the locking force is not weak at all. According to other user tests, it can even stably support ultra-telephoto full-frame lenses of more than 300mm. If you only care about the stability of the support, and there is no requirement for additional features, then the map suit is a very cost-effective choice. advantage: 1 full metal texture work fine 2. PTZ locking force, able to support the mainstream full-width configuration Disadvantages: 1. Quick plate does not have anti-drop protection design 2. The lack of gear selection in the pin angle 3. Improper design of PTZ panoptic function, clamp width is only 25mm If nothing goes wrong, the map set should deserve an absolute positive feedback. Without the price of the Manfrotto PIXI 2/3, you can buy a full set of camera support system, and the use of material bearing no ambiguity, the price can be described as bursting. Based on the guided price of 188 yuan, I believe that the manufacturer has given the optimal solution that can be provided within the cost range. The problem is that, as a supplement to conventional tripods, I believe most users will have a one-step approach to the idea, and it is highly probable that they will not be replaced long after they are started. The shortage and lack of function of the map suit will become more and more obvious with the increase in the number of uses, and the “mini†clip holder will just give people the impulse to change the devil. The same for the MT-01 kit friends and competitors do not even need to use the competition, only compare the product introduction is not difficult to find the gap between the two functions is far greater than the actual difference, after all, the competitive price of the Friend Merchants Guide is 399. Relatively perfect design means that there is no need to use the magic to change hands, so-called anti-theft anti-theft anti-friend business ... so this time still add money?
A live steaming screen is a big size screen which can connect our mobiles,in a live streaming,people often use their mobile to start a live conversation or a show for thousands of people online.but with a mobile small screen,a live streaming could be very inconvenient,by using our live streaming display big screen,we can see more clearly,the messages,the screens,and the movable bracket allows to move it to anywhere we need,and also we designed several interfaces,HDMI for PC connect,USB to connect an external device like digital camera microphone and others.blue tooth is available too,live streaming screen,wired and wireless mobile projection,android iPhone,PC,screen sync,big size,for celebrities,influencer,life streaming,products selling,advertising and interactions.
Big Size Screen Live Streaming,Movable Live Streaming Projection Screen,Live Streaming Equipment,Live Streaming Screen Jumei Video(Shenzhen)Co.,Ltd , https://www.jmsxdisplay.com
RRS - TFA-01 Pocket 'Pod Direct Link 
SUNWAYFOTO 晟崴 mini desktop aluminum tripod T1A10235 yuan Tmall featured direct links 
Pre-sale *T1A20D-T micro SLR camera desktop micro aluminum alloy mini mobile phone tripod table tripod 398 yuan Lynx featured direct link 
Marsace MT-01 mobile phone tripod head SLR tripod octopus mini desktop portable stand 399 yuan Jingdong direct link 
