At the same output power, the drive current required for high voltage LEDs is much lower than for low voltage LEDs. For example, the high-voltage blue 1W LED of the crystal photoelectric photoelectricity has a forward voltage drop of up to 50V, which can output 1W power with only 20mA driving current; and a normal forward voltage drop of 3V 1W LED requires 350mA driving current. In order to output 1W power, the high-voltage LED with the same output power dissipates much less power than the low-voltage LED during operation, which means that the cost of the heat-dissipating aluminum casing can be greatly reduced. High-voltage LEDs can significantly reduce AC-DC conversion efficiency losses. Taking 10W output power as an example, if a 1W high-voltage LED with a forward voltage drop of 50V is used, the output can be configured in 2 and 4 strings, and the forward voltage drop of 4 series LEDs is 200V, which means only from the city. Electric 220V AC (AC) can be bridged and reduced by 20V. But if we use a 1W low-voltage LED with a forward voltage drop of 3V, even 10 series of forward voltage drops are only 30V, which means that we need to step down from 220V AC mains to 30V DC. We know that the lower the input and output voltage difference, the higher the conversion efficiency of AC to DC. It can be seen that if high voltage LED is used, the efficiency of the transformer can be greatly improved, which can greatly reduce the power loss during AC-DC conversion. A reduced heat consumption can further reduce the cost of the heat sink. Therefore, if high-voltage LEDs are used to develop LED general-purpose lighting products, the overall power consumption of LEDs will be greatly reduced, thereby greatly reducing the design requirements for the heat-dissipating housing. We can use the thinner and lighter aluminum housing to meet the heat dissipation of LED lamps. demand. Since the cost of the heat-dissipating aluminum casing is one of the main components of the LED lighting fixture, the effective reduction of the cost of the aluminum casing also means an effective reduction in the cost of the overall LED lighting fixture. It can be seen that the high-voltage LED can bring about an effective reduction in the cost and weight of the LED lighting fixture, but its more important significance is to greatly reduce the design requirements for the heat dissipation system, thereby effectively clearing the maximum entry of the LED lighting fixture into the indoor lighting market. Technical barriers. Therefore, high-voltage LEDs will dominate the market for future LED general lighting fixtures. Cabinet Lights,LEDCabinet Lights,Under Cabinet LED Lights,Kitchen Cabinet Lights Dongguan baiyou electronic co.,ltd , https://www.dgbaiyou.com