Installation/Deletion does not include installation information in the manual or online help. Switch Cabinet,Network Switch Cabinet,Wall Mount Switch Rack,Switch Board Cabinet Shaoxing AnFu Energy Equipment Co.Ltd , https://www.sxanfu.com
Install the service pack on Windows embedded to install the service pack from the product CD/DVD.
Service packs can be downloaded free of charge from the Internet. Save the file on the appropriate media. Note the size of the downloaded file.
Installation - Unable to install MSDE
There may be several reasons for the MSDE (Microsoft Desktop Engine) installation failure, for example, the registry entry was not removed after uninstalling MSDE.
For more information, please refer to the contents under the part number in Siemens Online Support. Microsoft SQL Server cannot be installed.
If you are unable to install Microsoft SQL Server, check the Auto Start Type of the Service on your computer. "Deactivated" is not allowed in "Auto Start Type". This service is a prerequisite for a successful installation, subject to Microsoft installation restrictions.
Change license To terminate the license change operation, terminate the WinCC flexible autostart function. The WinCC flexible autostart function can be reactivated after a successful change.
Port activation of ALM activation is performed automatically when WinCC flexible is installed. Port Activation can be activated or deactivated.
The publish directory and program installer grants all users permission to write the following directories in "%ALLUSERSPROFILE%\Application data":
"SIEMENS AG\SIMATIC WinCC flexible"
"SIEMENS AG\SIMATIC WinCC flexible 2008\Caches"
You need to use these directories to perform a centralized recording of WinCC flexible.
In the Windows Firewall, the installer has the following programs enabled:
SIMATIC WinCC flexible 2008 application
SIMATIC WinCC flexible 2008 Tracking Server Automation License Manager Installing the SIMATIC product Before you start installing the SIMATIC product, disable the "WinCC flexible Start Center".
Install Microsoft SOAP Toolkit 3.0
As of the 2008 version of WinCC flexible, there is no longer a need to install the Microsoft SOAP Toolkit 3.0.
WinCC flexible integrated in SIMOTION SCOUT
The following requirements must be met in order to ensure that WinCC flexible integrated into SIMOTION SCOUT runs without problems:
Working memory: 4 GB
Processor: Dual-core access to more information in all cases in the online help. The "SIMOTION SCOUT Project Data" section describes the important performance characteristics of the integrated operation.
The installation sequence of the integrated operations in SIMOTION SCOUT installs the software in the following order.
Following this installation sequence ensures that there are no problems with the integration.
STEP 7
SIMOTION SCOUT V4.1.1 HF3 or higher
For WinCC flexible version 2007 HF4 or higher, please refer to the compatibility table supplied with the SIMOTION SCOUT CD.
Audit Viewer
The Audit Viewer has been released for:
German, English, French, Italian, and Spanish Operating Systems The MUI operating system in one of the languages ​​listed above evaluates the "Check Tracking" generated in one of the languages ​​listed above.
Audit Viewer V6.2 for Windows XP has been released. The Audit Viewer V6.2 is located in the following directory on the WinCC flexible product DVD: CD_2/Support/Audit Viewer/Setup.
The version of Audit Viewer for Windows 7 will be released on the product support page.
ProTool after uninstalling WinCC flexible
If you uninstall WinCC flexible, ProTool no longer works.
Remedy:
Uninstall ProTool.
Reinstall ProTool.
Open the Control Panel.
Double click on "Software".
Select the "SIMATIC STEP 7" entry.
Click "Change."
In the installation dialog, select "Repair".
Check traces and logs with checksums Before you can update WinCC flexible with a service pack or a new version, you must exit and save the check trace or log with the checksum. After updating WinCC flexible, the check trace or log with the checksum will continue to process the new file.
The new version of WinCC flexible starts logging in the defined state.
Error messages during installation Occasionally, during the installation of WinCC flexible, the error message "S7oiehsx.exe - Application error" appears.
Confirm the error message with "OK". The error message does not affect the operation of WinCC flexible.
Install WinCC flexible V1.3 SP2
Close all open SIMATIC applications and start installing WinCC flexible V1.3 SP2.
Changing the installation If you have installed WinCC flexible 2008 or WinCC flexible 2008 SP1, update your existing installation with WinCC flexible 2008 SP2. However, you cannot make changes to the installed version.
Follow the steps below to change an existing installation and add components, such as integration into STEP7 or adding a language:
Open Control Panel > Add or Remove Programs.
Select "WinCC flexible 2008 SP2".
Click "Change." The WinCC flexible InstallShield Wizard opens.
Change the installation as required.
finish installation.
To update the recently added component to SP2, install "WinCC flexible 2008 SP2" again with "setup.exe".